1. Giới thiệu Router 4G công nghiệp Teltonika RUT360
Teltonika RUT360: là phiên bản nâng cấp cho Teltonika RUT240, Bộ định tuyến di động Router 4G công nghiệp nhỏ gọn này cung cấp khả năng kết nối Internet bằng mạng di động 4G, Wi-Fi và có dây.
- Nhà phân phối Teltonika RUT360, Router WiFi 4G công nghiệp chính hãng tại Việt Nam
- Nhà sản xuất: Teltonika Networks
- Teltonika RUT360 được thiết kế, sản xuất, lắp giáp tại Lithuania.
- Teltonika RUT360 có xuất xứ: Lithuania
- Teltonika RUT360 được chứng nhận Made in Europe
2. Các tính năng chính của Teltonika RUT360
- Tốc độ di động lên đến 300Mbps với tính năng Tổng hợp sóng mang
- WiFi 802.11 b/g/n
- Kích thước nhỏ – dễ dàng tích hợp ở mọi nơi
- Vỏ nhôm chắc chắn
- Tường lửa và nhiều dịch vụ VPN, bao gồm OpenVPN, IPsec, PPTP, L2TP & SSTP
- Tương thích với Hệ thống quản lý từ xa Teltonika
Teltonika RUT360 được trang bị 02 cổng LAN, WiFi 802.11 b/g/n và mô-đun di động 4G LTE Cat 6, cung cấp tốc độ dữ liệu lên đến 300 Mbps.
Teltonika RUT360: Các tính năng lập trình, giám sát từ xa và bảo mật độc đáo giúp RUT360 hoàn hảo cho các ứng dụng IoT và M2M, nơi bắt buộc phải có kết nối an toàn và đáng tin cậy. Chức năng tổng hợp nhà cung cấp dịch vụ làm cho thiết bị nhỏ gọn này không thể thay thế được trong các khu vực hoặc ứng dụng mà tốc độ dữ liệu di động bị hạn chế.
3. Video giới thiệu RUT360 – LTE CAT6 Industrial Cellular Router
Tham khảo thêm giải pháp ứng dụng Router WiFi 4G công nghiệp:
- Giải pháp Quản lý bộ sạc xe chạy bằng điện (EV) – Circontrol với bộ định tuyến Router wifi 4G công nghiệp RUT240 của Teltonika
- Giải pháp Kết nối giao thông công cộng sử dụng thiết bị định tuyến Router wifi 4G công nghiệp của Teltonika-networks
- Giải pháp kết nối di động cho xe cảnh sát với bộ định tuyến Router WiFi 4G công nghiệp của Teltonika-Networks
- Giải pháp giám sát camera tạm thời với Router wifi 4G Dual SIM chuẩn công nghiệp Teltonika đến từ EU
- Đếm hành khách theo thời gian thực trên phương tiện giao thông công cộng
4. Thông số kỹ thuật của Teltonika RUT360
MOBILE | |
Mobile module | 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps |
Status | Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID |
SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply |
USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
Black/Whiles list (planned) | Operator black/white list |
Multiple PDN | Possibility to use different PDNs for multiple network access and services |
Band management | Band lock, Used band status display |
APN | Auto APN |
Bridge mode | Direct connection (bridge) between mobile ISP and device on LAN |
WIRELESS | |
Wireless mode | 802.11 b/g/n, 2×2 MIMO, Access Point (AP), Station (STA) |
WiFi security | WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation |
ESSID | ESSID stealth mode |
Wireless Hotspot | Captive portal (Hotspot), internal/external Radius server, SMS OTP, MAC auth, built in customizable landing page, walled garden |
ETHERNET | |
WAN | 1 x WAN port (can be configured as LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover |
LAN | 1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover |
NETWORK | |
Routing | Static routes, Dynamic routes (planned) |
Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP (planned), SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP (planned), MQTT (planned), Wake on LAN (WOL) (planned) |
VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
Connection monitoring | Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection |
Firewall | Port forwards, traffic rules, NAT rules, custom rules |
DHCP | Static and dynamic IP allocation, DHCP Relay, Relayd |
QoS / Smart Queue Management (SQM) (planned) | Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
DDNS (planned) | Supported >25 service providers, others can be configured manually |
Network backup | Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover |
Load balancing | Balance Internet traffic over multiple WAN connections |
SSHFS (optional) | Possibility to mount remote file system via SSH protocol (not available in standard FW) |
SECURITY | |
Authetication | Pre-shared key, digital certificates, X.509 certificates |
Firewall | Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
Attack prevention | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
VLAN | Tag based VLAN separation |
Mobile quota control | Custom data limits for both SIM cards |
WEB filter (planned) | Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only |
Access control | Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
VPN | |
OpenVPN | Multiple clients and a server can run simultaneously, 12 encryption methods |
OpenVPN Encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
IPSec | IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256) |
GRE | GRE tunnel |
PPTP, L2TP | Client/Server instances can run simultaneously, L2TPv3 support (planned) |
Stunnel (planned) | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code |
DMVPN (planned) | Method of building scalable IPsec VPNs |
SSTP (planned) | SSTP client instance support |
ZeroTier | ZeroTier VPN client support |
WireGuard | WireGuard VPN client and server support |
MODBUS | |
MODBUS TCP SLAVE (PLANNED) | |
ID filtering | Respond to one ID in range [1;255] or any |
Allow remote access | Allow access through WAN |
Custom registers | Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality |
MODBUS TCP MASTER (PLANNED) | |
Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
MQTT GATEWAY (PLANNED) | |
Gateway | Allows sending commands and receiving data from Modbus Master trough MQTT broker |
DATA TO SERVER (PLANNED) | |
Protocols | HTTP(S), MQTT, Azure MQTT, Kinesis |
MONITORING & MANAGEMENT | |
WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
FOTA | Firmware update from server, automatic notification |
SSH | SSH (v1, v2) |
SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
Call | Reboot, Status, Mobile data on/off, Output on/off |
MQTT (planned) | MQTT Broker, MQTT publisher |
SNMP (planned) | SNMP (v1, v2, v3), SNMP trap |
JSON-RPC | Management API over HTTP/HTTPS |
Modbus (planned) | Modbus TCP status/control |
RMS | Teltonika Remote Management System (RMS) |
IoT PLATFORMS | |
Clouds of things | Allows monitoring of: Device data, Mobile data, Network info, Availability |
ThingWorx | Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
Cumulocity | Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP |
Azure IoT Hub | Can send device IP, Number of bytes send/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server |
SYSTEM CHARACTERISTICS | |
CPU | QCA9531, MIPS 24kc, 650 MHz |
RAM | 128 MB, DDR2 |
FLASH storage | 16 MB, SPI Flash |
FIRMWARE / CONFIGURATION | |
WEB UI | Update FW from file, check FW on server, configuration profiles, configuration backup |
FOTA | Update FW/configuration from server |
RMS | Update FW/configuration for multiple devices at once |
Keep settings | Update FW without losing current configuration |
INPUT/OUTPUT | |
Configurable I/O | 2 x Configurable digital Inputs/Outputs. Digital input 0 – 6 V detected as logic low, 8 – 30 V detected as logic high. Open collector output, max output 30 V, 300 mA |
Events | SMS, Email, RMS |
POWER | |
Connector | 4 pin industrial DC power socket |
Input voltage range | 9 – 30 VDC, reverse polarity protection, voltage surge/transient protection |
Power consumption | 10.5 W max |
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM) | |
Ethernet | 2 x RJ45 ports, 10/100 Mbps |
I/Os | 2 x Configurable digital Inputs/Outputs on 4 pin power connector |
Status LEDs | 2 x Mobile connection type, 3 x Mobile connection strength, 2 x Eth status, 1 x Power |
SIM | 1 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders |
Antenna | 2 x SMA for LTE, 2 x RP-SMA for WiFi |
Power | 1 x 4 pin DC connector |
Reset | Reboot/User default reset/Factory reset button |
PHYSICAL SPECIFICATION | |
Casing material | Aluminium housing with DIN rail mounting option |
Dimensions (W x H x D) | 100 x 30 x 85 mm |
Weight | 247 g |
Mounting options | DIN rail, flat surface placement |
OPERATING ENVIRONMENT | |
Operating temperature | -40 C to 75 C |
Operating humidity | 10 % to 90 % non-condensing |
5. Tài liệu liên quan
Download: RUT360 Datasheet
Đánh giá
Chưa có đánh giá nào.