1. Giới thiệu sản phẩm Teltonika TRB255
Nhà phân phối Teltonika TRB255, GATEWAY 4G công nghiệp chính hãng tại Việt Nam
Nhà sản xuất: Teltonika Networks
Teltonika TRB255 đều được thiết kế, sản xuất, lắp giáp tại Lithuania.
Teltonika TRB255 xuất xứ: Lithuania
Teltonika TRB255 được chứng nhận Made in Europe
2. Các tính năng chính của Teltonika TRB255
Teltonika TRB255 có thể được sử dụng để tích hợp các thiết bị công nghiệp hiện đại và kế thừa vào một giải pháp thông qua các giao diện RS232, RS485 & Ethernet.
Teltonika TRB255 Gateway 4G LTE Cat M1 & NB-IoT công nghiệp này tương thích ngược với mạng EGPRS (2G). Nó vẫn có thể được sử dụng với mạng 2G, tuy nhiên trong trường hợp nó bị tắt, có khả năng chuyển sang các tùy chọn kết nối LPWAN.
Teltonika TRB255 có một loạt các tính năng mạng và công nghiệp như Modbus, điều khiển SMS, Tường lửa, OpenVPN và hơn thế nữa.
Teltonika TRB255: sử dụng 2 SIM, tự động chuyển chuyển đổi dự phòng, WAN dự phòng và các tình huống chuyển mạch khác.
Teltonika TRB255: Hỗ trợ nhiều loại điện áp từ 9-30V. Teltonika TRB255 tương thích với Hệ thống Quản lý Từ xa Mạng Teltonika (RMS).
3. Video giới thiệu Quick Start Guide | Teltonika Networks TRB255 Gateway
Tham khảo thêm giải pháp ứng dụng Gateway 4G công nghiệp của Teltonika:
- Giám sát từ xa các đường ống dẫn dầu và khí đốt với bộ Gateway Teltonika TRB145 công nghiệp
- Giám sát từ xa các nhà máy điện mặt trời với các thiết bị Router Gateway 4G của Teltonika
- Giải pháp kết nối Digital Signage thông qua hệ thống Router gateway 4G Teltonika
- Giải pháp kết nối nhiều hệ thống camera IP đáng tin cậy với các thiết bị mạng công nghiệp của Teltonika
- Kết nối lưới điện thông minh & trạm biến áp với Teltonika TRB142
4. Thông số kỹ thuật của Teltonika TRB255
MOBILE | |
Mobile module | LTE (Cat M1) / NB-IoT / EGPRS |
SIM switch | 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, on roaming, no network, network denied, data connection fail |
Status | Signal strength, Connected band, SINR, RSRP, RSRQ, Bytes sent/received |
Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS (planned), SMS autoreply |
USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
Black/White list (planned) | Operator black/white list |
Multiple PDN | Possibility to use different PDNs for multiple network access and services |
Band management | Used band status display, Band lock (planned) |
APN | Auto APN |
ETHERNET | |
LAN | 1 x LAN port 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover (Configurable to work as WAN port) |
NETWORK | |
Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2) (planned) |
Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, PPP, SSH, DHCP, Telnet, MQTT, Wake On Lan (WOL) |
VoIP passthrough support (planned) | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
Connection monitoring | Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection |
Firewall | Port forward, traffic rules, custom rules |
DHCP | Static and dynamic IP allocation, DHCP Relay |
QoS / Smart Queue Management (SQM) (planned) | Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
DDNS | Supported >25 service providers, others can be configured manually |
SSHFS (planned) | Possibility to mount remote file system via SSH protocol |
SECURITY | |
Authentication | Pre-shared key, digital certificates, X.509 certificates |
Firewall | Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
Attack prevention | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
VLAN (planned) | Tag based VLAN separation |
Mobile quota control | Custom data limits for both SIM cards |
WEB filter (planned) | Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only |
Access control | Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
VPN | |
OpenVPN | Multiple clients and server can be running simultaneously, 12 encryption methods |
OpenVPN Encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
IPSec | IKEv1, IKEv2, with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
GRE | GRE tunnel |
Stunnel | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code |
PPTP, L2TP | Client/Server services can run simultaneously, L2TPv3 support |
DMVPN | Method of building scalable IPsec VPNs |
SSTP | SSTP client instance support |
ZeroTier | ZeroTier VPN client support |
SERIAL COMMMUNICATION MODES | |
Modes | Console, OverIP, Modem (planned), Modbus RTU master, Modbus gateway, NTRIP client (planned) |
MODBUS | |
MODBUS TCP SLAVE | |
ID filtering | Respond to one ID in range [1;255] or any |
Allow remote access | Allow access through WAN |
Custom registers | Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality |
MODBUS TCP MASTER | |
Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
MODBUS RTU MASTER | |
Supported baud rates | From 300 to 3000000 |
Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
Number of data bits | 7 or 8 |
Number of stop bits | 1 or 2 |
Parity bits | None, Even, Odd |
Flow control | None, RTS/CTS (only for RS232 interface), Xon/Xoff |
MQTT GATEWAY | |
Gateway | Allows sending commands and receiving data from Modbus Master trough MQTT broker |
DATA TO SERVER | |
Protocols | HTTP(S), MQTT, Azure MQTT, Kinesis |
MONITORING & MANAGEMENT | |
WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
FOTA | Firmware update from server, automatic notification |
SSH | SSH (v1, v2) |
SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
MQTT | MQTT Broker, MQTT publisher |
SNMP | SNMP (v1, v2, v3), SNMP Trap |
JSON-RPC | Management API over HTTP/HTTPS |
Modbus | Modbus TCP status/control |
RMS | Teltonika Remote Management Systems (RMS) |
IoT PLATFORMS | |
Cloud of Things | Allows monitoring of: Device data, Mobile data, Network info, Availability |
ThingWorx | Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
Cumulocity | Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP |
Azure IoT Hub | Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server |
SYSTEM CHARACTERISTICS | |
CPU | Qualcomm QCA9531, MIPS 24kc, 650 MHz |
RAM | 64 MB, DDR2 |
Flash storage | 16MB SPI Flash (4 MB available for user) |
FIRMWARE / CONFIGURATION | |
WEB UI | Update FW from file, check FW on server, configuration profiles, configuration backup |
FOTA | Update FW/configuration from server |
RMS | Update FW/configuration for multiple devices |
Keep settings | Update FW without losing current configuration |
FIRMWARE CUSTOMIZATION | |
Operating system | RutOS (OpenWrt based Linux OS) |
Supported languages | Busybox shell, Lua, C, C++ |
Development tools | SDK package with build environment provided |
LOCATION TRACKING | |
GNSS | GPS, GLONASS, BeiDou, Galileo and QZSS |
Coordinates | GNSS coordinates via WebUI, SMS, TAVL, RMS |
NMEA | NMEA 0183 |
NTRIP (planned) | NTRIP protocol (Networked Transport of RTCM via Internet Protocol) |
Server software | Supported server software TAVL, RMS |
Mobile Network Geolocating | Location without using GPS, get approximate location based on mobile tower on RMS |
Geofencing | Configurable multiple geofence zones |
INPUT/OUTPUT | |
Configurable I/O | 3 x Configurable Inputs/Outputs. Digital input 0 – 6 V detected as logic low, 8 – 30 V detected as logic high. Open collector output, max output 30 V, 300 mA |
Analog input | 1 x Analog input (0 – 30 V) |
Events | SMS, Email |
Output control | HTTP POST/GET, Schedule |
I/O juggler | Allows to set certain I/O conditions to initiate event |
SERIAL | |
RS232 | Terminal block connector: TX, RX, RTS, CTS |
RS485 | Terminal block connector: D+, D-, R+, R- (2 or 4 wire interface) |
Supported baud rates | From 300 to 3000000 |
Number of data bits | 7 or 8 |
Number of stop bits | 1 or 2 |
Parity | None, Even, Odd |
Flow control | None, RTS/CTS (only for RS232 interface), Xon/Xoff |
POWER | |
Connector | 2 pins in 16 pin industrial terminal block |
Input voltage range | 9 – 30 VDC, reverse polarity protection, surge protection +/-1 kV 50 µs max |
Power consumption | Idle: <1.2 W, Max: <5 W |
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTON, SIM) | |
Ethernet | 1 x RJ45 port, 10/100 Mbps |
I/O’s | 3 x Configurable I/O, 1 x Analog input in 16 pin terminal block |
Status LEDs | 3 x connection status LEDs, 3 x connection strength LEDs, 1 x power LED, 1 x Eth port status LED |
SIM | 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, double stacked SIM tray |
Power | 2 pins in 16 pin terminal block |
Antennas | 1 x SMA connector for Mobile, 1 x SMA connector for GNSS |
RS232 | 4 pins in 16 pin terminal block (TX, RX, RTS, CTS) |
RS485 | 4 pins in 16 pin terminal block (D+, D-, R+, R-) |
Reset | Reboot/User default reset/Factory reset button |
PHYSICAL SPECIFICATION | |
Casing material | Aluminium housing with DIN rail mounting option |
Dimensions (W x H x D) | 83 x 25 x 74.2 mm |
Weight | 165 g |
Mounting options | DIN rail, wall mounting (additional kits needed), flat surface placement |
OPERATING ENVIRONMENT | |
Operating temperature | -40 ℃ to 75 ℃ |
Operating humidity | 10% to 90% non-condensing |
Đánh giá
Chưa có đánh giá nào.